IMPRESSION INSTRUCTIONS

  1. Prepare: Wash your hands thoroughly before handling the impression materials. Lay out all the materials provided in the kit on a clean, flat surface.

  2. Mixing: Mix two components together (base/blue and catalyst/white) to create the impression material. Try to work quickly as the impression material will set up fast.

  3. Load the Tray: Once the impression material is properly mixed, load it onto the impression tray. Ensure that the tray is filled evenly but not overfilled. Avoid trapping air bubbles as much as possible.

  4. Insertion: Carefully place the loaded tray into your mouth. Bite down gently and hold the tray in place with your fingers.

  5. Setting Time: Remain still while the impression material sets (~2-3 min). It's crucial to maintain a consistent bite or position during this time.

  6. Removal: Once the impression material has set, gently remove the tray from your mouth. Use steady, even pressure to avoid distortion of the impression.

  7. Inspect: Examine the impression to ensure all necessary details are captured clearly. Check for any defects or areas of distortion.

  8. Cleaning: Clean any excess impression material from your mouth using water and a toothbrush. Dispose of any disposable components of the kit according to the instructions.

  9. Packaging: Carefully package it as instructed to prevent damage during transit. Include any necessary paperwork or labels provided. SHIPPING RETURN LABEL WILL BE PROVIDED IN IMPRESSION BOX.

  10. Shipping: Send the packaged impression to the designated address within the specified timeframe. SHIPPING RETURN LABEL WILL BE PROVIDED IN IMPRESSION BOX.